Yeti 3000X › runs › Gas Furnace Blower (1/2 HP)

Can a Goal Zero Yeti 3000X run a gas furnace blower (1/2 hp)?

Yes — the Goal Zero Yeti 3000X runs a gas furnace blower (1/2 hp).
The gas furnace blower (1/2 hp) draws about 800 W running, with a 2,350 W startup surge; the Yeti 3000X delivers 2,000 W continuous and 3,500 W surge. Its 3,032 Wh battery runs one for about 6.8 h.

800 WGas Furnace Blower (1/2 HP) running

2,000 WYeti 3000X continuous

~6.8 hruntime

3,032 WhYeti 3000X capacity

Check the Yeti 3000X at Goal Zero → Full specs

🔗 Brand-direct affiliate link. It will earn a commission once the program is approved — at no extra cost to you.

The check
Continuous: 2,000 W ≥ 800 W needed → ok
Surge: 3,500 W ≥ 2,350 W needed → ok
Runtime: 3,032 Wh × 90% ÷ 400 W avg = ~6.8 h

Bigger units that run it longer

Goal Zero Yeti 1000 Core

983 Wh · 1,200 W cont

~2.2 h

EcoFlow DELTA 2

1,024 Wh · 1,800 W cont

~2.3 h

Anker SOLIX C1000

1,056 Wh · 1,800 W cont

~2.4 h

Jackery Explorer 1000 v2

1,070 Wh · 1,500 W cont

~2.4 h

Bluetti AC180

1,152 Wh · 1,800 W cont

~2.6 h

Jackery Explorer 1000 Plus

1,264 Wh · 2,000 W cont

~2.8 h

Goal Zero Yeti 1500X

1,516 Wh · 2,000 W cont

~3.4 h

Jackery Explorer 2000 Plus

2,042 Wh · 3,000 W cont

~4.6 h

EcoFlow DELTA 2 Max

2,048 Wh · 2,400 W cont

~4.6 h

Common questions

Can the Goal Zero Yeti 3000X run a gas furnace blower (1/2 hp)?

Yes. A gas furnace blower (1/2 hp) draws about 800 W with a 2,350 W startup surge, and the Goal Zero Yeti 3000X delivers 2,000 W continuously with a 3,500 W surge rating — comfortably enough. On its 3,032 Wh battery it runs one for roughly 6.8 h (the load cycles ~50% of the time, so it lasts longer than raw watts suggest).

Sources: Gas Furnace Blower (1/2 HP) wattage — Standard appliance-wattage / generator-sizing charts (representative values; verify your nameplate); Yeti 3000X specs — manufacturer published specifications (compiled 2026-06-15; approximate). Informational only — a computed sizing estimate from published appliance-wattage charts and manufacturer station specs. It is not an electrical guarantee. For hardwired or whole-home backup, transfer switches, or any permanent install, consult a licensed electrician.