C1000 › runs › Gas Furnace Blower (1/2 HP)
Can an Anker SOLIX C1000 run a gas furnace blower (1/2 hp)?
The gas furnace blower (1/2 hp) draws about 800 W running, with a 2,350 W startup surge; the C1000 delivers 1,800 W continuous and 2,400 W surge. Its 1,056 Wh battery runs one for about 2.4 h.
Continuous: 1,800 W ≥ 800 W needed → ok
Surge: 2,400 W ≥ 2,350 W needed → ok
Runtime: 1,056 Wh × 90% ÷ 400 W avg = ~2.4 h
Bigger units that run it longer
Common questions
Can the Anker SOLIX C1000 run a gas furnace blower (1/2 hp)?
Yes. A gas furnace blower (1/2 hp) draws about 800 W with a 2,350 W startup surge, and the Anker SOLIX C1000 delivers 1,800 W continuously with a 2,400 W surge rating — comfortably enough. On its 1,056 Wh battery it runs one for roughly 2.4 h (the load cycles ~50% of the time, so it lasts longer than raw watts suggest).
Sources: Gas Furnace Blower (1/2 HP) wattage — Standard appliance-wattage / generator-sizing charts (representative values; verify your nameplate); C1000 specs — manufacturer published specifications (compiled 2026-06-15; approximate). Informational only — a computed sizing estimate from published appliance-wattage charts and manufacturer station specs. It is not an electrical guarantee. For hardwired or whole-home backup, transfer switches, or any permanent install, consult a licensed electrician.