PowerFitsize it right · don't overpay

AC300 + B300 › runs › Refrigerator (modern)

Can a Bluetti AC300 + B300 run a refrigerator (modern)?

Yes — the Bluetti AC300 + B300 runs a refrigerator (modern).
The refrigerator (modern) draws about 150 W running, with a 1,200 W startup surge; the AC300 + B300 delivers 3,000 W continuous and 6,000 W surge. Its 3,072 Wh battery runs one for about 53 h.
150 WRefrigerator (modern) running
3,000 WAC300 + B300 continuous
~53 hruntime
3,072 WhAC300 + B300 capacity
🔗 Brand-direct affiliate link. It will earn a commission once the program is approved — at no extra cost to you.
The check
Continuous: 3,000 W ≥ 150 W needed → ok
Surge: 6,000 W ≥ 1,200 W needed → ok
Runtime: 3,072 Wh × 90% ÷ 53 W avg = ~53 h

Bigger units that run it longer

Bluetti EB3A
268 Wh · 600 W cont
~4.6 h
Goal Zero Yeti 500X
505 Wh · 300 W cont
~8.7 h
Goal Zero Yeti 700
677 Wh · 1,000 W cont
~12 h
Bluetti EB70S
716 Wh · 800 W cont
~12 h
EcoFlow RIVER 2 Pro
768 Wh · 800 W cont
~13 h
Bluetti AC70
768 Wh · 1,000 W cont
~13 h
Anker SOLIX C800
768 Wh · 1,200 W cont
~13 h
Goal Zero Yeti 1000 Core
983 Wh · 1,200 W cont
~17 h
EcoFlow DELTA 2
1,024 Wh · 1,800 W cont
~18 h

Common questions

Can the Bluetti AC300 + B300 run a refrigerator (modern)?

Yes. A refrigerator (modern) draws about 150 W with a 1,200 W startup surge, and the Bluetti AC300 + B300 delivers 3,000 W continuously with a 6,000 W surge rating — comfortably enough. On its 3,072 Wh battery it runs one for roughly 53 h (the load cycles ~35% of the time, so it lasts longer than raw watts suggest).

Sources: Refrigerator (modern) wattage — Standard appliance-wattage / generator-sizing charts (representative values; verify your nameplate); AC300 + B300 specs — manufacturer published specifications (compiled 2026-06-15; approximate). Informational only — a computed sizing estimate from published appliance-wattage charts and manufacturer station specs. It is not an electrical guarantee. For hardwired or whole-home backup, transfer switches, or any permanent install, consult a licensed electrician.