EB3A › runs › Refrigerator (modern)

Can a Bluetti EB3A run a refrigerator (modern)?

Yes — the Bluetti EB3A runs a refrigerator (modern).
The refrigerator (modern) draws about 150 W running, with a 1,200 W startup surge; the EB3A delivers 600 W continuous and 1,200 W surge. Its 268 Wh battery runs one for about 4.6 h.

150 WRefrigerator (modern) running

600 WEB3A continuous

~4.6 hruntime

268 WhEB3A capacity

Check the EB3A at Bluetti → Full specs

🔗 Brand-direct affiliate link. It will earn a commission once the program is approved — at no extra cost to you.

The check
Continuous: 600 W ≥ 150 W needed → ok
Surge: 1,200 W ≥ 1,200 W needed → ok
Runtime: 268 Wh × 90% ÷ 53 W avg = ~4.6 h

Bigger units that run it longer

677 Wh · 1,000 W cont

768 Wh · 1,000 W cont

~13 h

Anker SOLIX C800

768 Wh · 1,200 W cont

~13 h

Goal Zero Yeti 1000 Core

983 Wh · 1,200 W cont

~17 h

EcoFlow DELTA 2

1,024 Wh · 1,800 W cont

~18 h

Anker SOLIX C1000

1,056 Wh · 1,800 W cont

~18 h

Common questions

Can the Bluetti EB3A run a refrigerator (modern)?

Yes. A refrigerator (modern) draws about 150 W with a 1,200 W startup surge, and the Bluetti EB3A delivers 600 W continuously with a 1,200 W surge rating — comfortably enough. On its 268 Wh battery it runs one for roughly 4.6 h (the load cycles ~35% of the time, so it lasts longer than raw watts suggest).

Sources: Refrigerator (modern) wattage — Standard appliance-wattage / generator-sizing charts (representative values; verify your nameplate); EB3A specs — manufacturer published specifications (compiled 2026-06-15; approximate). Informational only — a computed sizing estimate from published appliance-wattage charts and manufacturer station specs. It is not an electrical guarantee. For hardwired or whole-home backup, transfer switches, or any permanent install, consult a licensed electrician.