Explorer 1000 Plus › runs › Space Heater (1500 W)

Can a Jackery Explorer 1000 Plus run a space heater (1500 w)?

Yes — the Jackery Explorer 1000 Plus runs a space heater (1500 w).
The space heater (1500 w) draws about 1,500 W (a steady resistive load); the Explorer 1000 Plus delivers 2,000 W continuous and 4,000 W surge. Its 1,264 Wh battery runs one for about 0.8 h.

1,500 WSpace Heater (1500 W) running

2,000 WExplorer 1000 Plus continuous

~0.8 hruntime

1,264 WhExplorer 1000 Plus capacity

Check the Explorer 1000 Plus at Jackery → Full specs

🔗 Brand-direct affiliate link. It will earn a commission once the program is approved — at no extra cost to you.

The check
Continuous: 2,000 W ≥ 1,500 W needed → ok
Surge: 4,000 W ≥ 1,500 W needed → ok
Runtime: 1,264 Wh × 90% ÷ 1,500 W avg = ~0.8 h

Bigger units that run it longer

EcoFlow DELTA 2

1,024 Wh · 1,800 W cont

~0.6 h

Anker SOLIX C1000

1,056 Wh · 1,800 W cont

~0.6 h

Jackery Explorer 1000 v2

1,070 Wh · 1,500 W cont

~0.6 h

Bluetti AC180

1,152 Wh · 1,800 W cont

~0.7 h

Goal Zero Yeti 1500X

1,516 Wh · 2,000 W cont

~0.9 h

Jackery Explorer 2000 Plus

2,042 Wh · 3,000 W cont

~1.2 h

EcoFlow DELTA 2 Max

2,048 Wh · 2,400 W cont

~1.2 h

Bluetti AC200L

2,048 Wh · 2,400 W cont

~1.2 h

Bluetti AC200MAX

2,048 Wh · 2,200 W cont

~1.2 h

Common questions

Can the Jackery Explorer 1000 Plus run a space heater (1500 w)?

Yes. A space heater (1500 w) draws about 1,500 W, and the Jackery Explorer 1000 Plus delivers 2,000 W continuously with a 4,000 W surge rating — comfortably enough. On its 1,264 Wh battery it runs one for roughly 0.8 h.

Sources: Space Heater (1500 W) wattage — Standard appliance-wattage / generator-sizing charts (representative values; verify your nameplate); Explorer 1000 Plus specs — manufacturer published specifications (compiled 2026-06-15; approximate). Informational only — a computed sizing estimate from published appliance-wattage charts and manufacturer station specs. It is not an electrical guarantee. For hardwired or whole-home backup, transfer switches, or any permanent install, consult a licensed electrician.