F1200 (PowerHouse 757) › runs › Sump Pump (1/2 HP)

Can an Anker SOLIX F1200 (PowerHouse 757) run a sump pump (1/2 hp)?

Q: Can the Anker SOLIX F1200 (PowerHouse 757) run a sump pump (1/2 hp)?

No. A sump pump (1/2 hp) needs 1,050 W continuous and a 2,150 W startup surge, but the Anker SOLIX F1200 (PowerHouse 757) only delivers 1,500 W continuous and a 1,800 W surge — so it can’t handle the startup surge. You'd want a larger unit.

No — the Anker SOLIX F1200 (PowerHouse 757) can't run a sump pump (1/2 hp).
The sump pump (1/2 hp) draws about 1,050 W running, with a 2,150 W startup surge; the F1200 (PowerHouse 757) delivers 1,500 W continuous and 1,800 W surge. That's not enough surge headroom.

1,050 WSump Pump (1/2 HP) running

1,500 WF1200 (PowerHouse 757) continuous

—runtime

1,229 WhF1200 (PowerHouse 757) capacity

The check
Continuous: 1,500 W ≥ 1,050 W needed → ok
Surge: 1,800 W < 2,150 W needed → fails

Units that do run a sump pump (1/2 hp)

Goal Zero Yeti 1000X

983 Wh · 1,500 W cont

~4.2 h

Goal Zero Yeti 1000 Core

983 Wh · 1,200 W cont

~4.2 h

EcoFlow DELTA 2

1,024 Wh · 1,800 W cont

~4.4 h

EcoFlow DELTA 3 Plus

1,024 Wh · 1,800 W cont

~4.4 h

Bluetti Elite 100 V2

1,024 Wh · 1,800 W cont

~4.4 h

Anker SOLIX C1000

1,056 Wh · 1,800 W cont

~4.5 h

Jackery Explorer 1000 v2

1,070 Wh · 1,500 W cont

~4.6 h

Bluetti AC180

1,152 Wh · 1,800 W cont

~4.9 h

Jackery Explorer 1000 Plus

1,264 Wh · 2,000 W cont

~5.4 h

Common questions

Can the Anker SOLIX F1200 (PowerHouse 757) run a sump pump (1/2 hp)?

No. A sump pump (1/2 hp) needs 1,050 W continuous and a 2,150 W startup surge, but the Anker SOLIX F1200 (PowerHouse 757) only delivers 1,500 W continuous and a 1,800 W surge — so it can’t handle the startup surge. You'd want a larger unit.

Sources: Sump Pump (1/2 HP) wattage — Standard appliance-wattage / generator-sizing charts (representative values; verify your nameplate); F1200 (PowerHouse 757) specs — manufacturer published specifications (compiled 2026-08-10; approximate). Informational only — a computed sizing estimate from published appliance-wattage charts and manufacturer station specs. It is not an electrical guarantee. For hardwired or whole-home backup, transfer switches, or any permanent install, consult a licensed electrician.