C800 › runs › Sump Pump (1/2 HP)
Can an Anker SOLIX C800 run a sump pump (1/2 hp)?
No — the Anker SOLIX C800 can't run a sump pump (1/2 hp).
The sump pump (1/2 hp) draws about 1,050 W running, with a 2,150 W startup surge; the C800 delivers 1,200 W continuous and 1,600 W surge. That's not enough surge headroom.
The sump pump (1/2 hp) draws about 1,050 W running, with a 2,150 W startup surge; the C800 delivers 1,200 W continuous and 1,600 W surge. That's not enough surge headroom.
1,050 WSump Pump (1/2 HP) running
1,200 WC800 continuous
—runtime
768 WhC800 capacity
The check
Continuous: 1,200 W ≥ 1,050 W needed → ok
Surge: 1,600 W < 2,150 W needed → fails
Continuous: 1,200 W ≥ 1,050 W needed → ok
Surge: 1,600 W < 2,150 W needed → fails
Units that do run a sump pump (1/2 hp)
Goal Zero Yeti 1000 Core
983 Wh · 1,200 W cont~4.2 h
EcoFlow DELTA 2
1,024 Wh · 1,800 W cont~4.4 h
Anker SOLIX C1000
1,056 Wh · 1,800 W cont~4.5 h
Jackery Explorer 1000 v2
1,070 Wh · 1,500 W cont~4.6 h
Bluetti AC180
1,152 Wh · 1,800 W cont~4.9 h
Jackery Explorer 1000 Plus
1,264 Wh · 2,000 W cont~5.4 h
Goal Zero Yeti 1500X
1,516 Wh · 2,000 W cont~6.5 h
Jackery Explorer 2000 Plus
2,042 Wh · 3,000 W cont~8.8 h
EcoFlow DELTA 2 Max
2,048 Wh · 2,400 W cont~8.8 h
Common questions
Can the Anker SOLIX C800 run a sump pump (1/2 hp)?
No. A sump pump (1/2 hp) needs 1,050 W continuous and a 2,150 W startup surge, but the Anker SOLIX C800 only delivers 1,200 W continuous and a 1,600 W surge — so it can’t handle the startup surge. You'd want a larger unit.
Sources: Sump Pump (1/2 HP) wattage — Standard appliance-wattage / generator-sizing charts (representative values; verify your nameplate); C800 specs — manufacturer published specifications (compiled 2026-06-15; approximate). Informational only — a computed sizing estimate from published appliance-wattage charts and manufacturer station specs. It is not an electrical guarantee. For hardwired or whole-home backup, transfer switches, or any permanent install, consult a licensed electrician.