C300 › runs › Oxygen Concentrator
Can an Anker SOLIX C300 run an oxygen concentrator?
No — the Anker SOLIX C300 can't run an oxygen concentrator.
The oxygen concentrator draws about 350 W running, with a 600 W startup surge; the C300 delivers 300 W continuous and 600 W surge. That's not enough continuous output.
The oxygen concentrator draws about 350 W running, with a 600 W startup surge; the C300 delivers 300 W continuous and 600 W surge. That's not enough continuous output.
350 WOxygen Concentrator running
300 WC300 continuous
—runtime
288 WhC300 capacity
The check
Continuous: 300 W < 350 W needed → fails
Surge: 600 W ≥ 600 W needed → ok
Continuous: 300 W < 350 W needed → fails
Surge: 600 W ≥ 600 W needed → ok
Units that do run an oxygen concentrator
Bluetti EB3A
268 Wh · 600 W cont~0.7 h
EcoFlow RIVER 3 Plus
286 Wh · 600 W cont~0.7 h
Goal Zero Yeti 300
297 Wh · 350 W cont~0.8 h
Bluetti AC60
403 Wh · 600 W cont~1.0 h
Bluetti AC50B
448 Wh · 700 W cont~1.2 h
EcoFlow RIVER 2 Max
512 Wh · 500 W cont~1.3 h
Jackery Explorer 500
518 Wh · 500 W cont~1.3 h
Goal Zero Yeti 700
677 Wh · 1,000 W cont~1.7 h
Bluetti EB70S
716 Wh · 800 W cont~1.8 h
Common questions
Can the Anker SOLIX C300 run an oxygen concentrator?
No. An oxygen concentrator needs 350 W continuous, but the Anker SOLIX C300 only delivers 300 W continuous — so it can’t sustain the running load. You'd want a larger unit.
Sources: Oxygen Concentrator wattage — Standard appliance-wattage / generator-sizing charts (representative values; verify your nameplate); C300 specs — manufacturer published specifications (compiled 2026-08-10; approximate). Informational only — a computed sizing estimate from published appliance-wattage charts and manufacturer station specs. It is not an electrical guarantee. For hardwired or whole-home backup, transfer switches, or any permanent install, consult a licensed electrician.