Appliances › Outage Essentials

What size power station runs a led lights (10 bulbs)?

Ten 10 W LED bulbs. Swap the count to taste; lighting is cheap.

100 Wrunning watts

—startup surge

100%duty cycle

889 Whfor 8.0 h

Need to run it alongside other things? Add it to the full sizing tool with the rest of your load.

What size you need for 8.0 h

You need about 889 Wh — and 20 units fit. The smallest sufficient is the Goal Zero Yeti 1000 Core; we never push more capacity than your load can use. Surge to clear: 100 W.

The math
Running watts (everything on at once) = 100 W
Surge watts (worst single startup + the rest running) = 100 W
Average draw (cyclic loads counted by their duty cycle) = 100 W
Watt-hours = 100 W × 8.0 h ÷ 90% usable reserve = 889 Wh

Goal Zero Yeti 1000 Coresmallest that fits

983 Wh 1,200 W cont · 2,400 W surge ~8.8 h on this load $$

A 1 kWh / 1,200 W unit for outage essentials at a friendlier price.

NMC · ~9 h AC; up to 600 W solar · 32 lb

Check price at Goal Zero → Full specs

EcoFlow DELTA 2

1,024 Wh 1,800 W cont · 2,700 W surge expandable ~9.2 h on this load $$

The benchmark 1 kWh / 1,800 W outage unit — fridge + CPAP + lights, expandable to 3 kWh.

LiFePO4 · ~50 min to 80% AC; expandable to 3 kWh · 27 lb

Check price at EcoFlow → Full specs

Anker SOLIX C1000

1,056 Wh 1,800 W cont · 2,400 W surge expandable ~9.5 h on this load $$

A strong 1 kWh / 1,800 W outage unit; SurgePad mode briefly runs 2,000 W resistive devices.

LiFePO4 · ~58 min AC; expandable to 2.1 kWh · 28 lb

Check price at Anker SOLIX → Full specs

Jackery Explorer 1000 v2

1,070 Wh 1,500 W cont · 3,000 W surge ~9.6 h on this load $$

The popular 1 kWh do-everything unit — runs a fridge, CPAP, and lights through an outage.

LiFePO4 · ~1.7 h AC; up to 400 W solar · 24 lb

Check price at Jackery → Full specs

Bluetti AC180

1,152 Wh 1,800 W cont · 2,700 W surge ~10 h on this load $$

A 1.15 kWh / 1,800 W unit that undercuts the 1 kWh class on price — strong outage value.

LiFePO4 · ~45 min to 80% AC; up to 500 W solar · 35 lb

Check price at Bluetti → Full specs

Jackery Explorer 1000 Plus

1,264 Wh 2,000 W cont · 4,000 W surge expandable ~11 h on this load $$$

A 2,000 W inverter in a portable body, and it scales to 5 kWh with add-on batteries.

LiFePO4 · ~1.7 h AC; expandable to 5 kWh · 32 lb

Check price at Jackery → Full specs

🔗 The "Check price" buttons are brand-direct affiliate links. Once our brand affiliate programs are approved these will earn a commission — at no extra cost to you, and it never changes which unit we recommend. Disclosure.

Can a specific unit run a led lights (10 bulbs)?

34 of the units we track deliver enough watts to run a led lights (10 bulbs). Check a specific one for the runtime and the full verdict:

Goal Zero Yeti 200X

187 Wh · 120 W cont

runs it

Jackery Explorer 240 v2

Jackery Explorer 300 Plus

677 Wh · 1,000 W cont

Common questions

What size power station do I need to run a led lights (10 bulbs)?

A led lights (10 bulbs) draws about 100 W running (a resistive load, so no real startup surge). So you want a unit with at least 100 W continuous output. For 8.0 h of runtime that's roughly 889 Wh of capacity — the Goal Zero Yeti 1000 Core is the smallest unit that clears all of it.

How many watts does a led lights (10 bulbs) use?

About 100 W while running.

Sources: LED Lights (10 bulbs) wattage — Standard appliance-wattage / generator-sizing charts (representative values; verify your nameplate); station specs — manufacturer published specifications (compiled 2026-06-15; approximate). Informational only — a computed sizing estimate from published appliance-wattage charts and manufacturer station specs. It is not an electrical guarantee. For hardwired or whole-home backup, transfer switches, or any permanent install, consult a licensed electrician.